A compliance certificate is one of the most reassuring documents in a facility manager's file. It is signed, it is dated, and it says your earthing, lightning and surge protection met the standard. What it does not say — and what quietly costs sites the most — is what happened the day after.
A certificate is a photograph, not a guarantee
An annual test captures a single moment. On the day the tester was on site, your earth resistance was within tolerance, your down conductors were continuous, and your surge devices were healthy. That is genuinely valuable — but it is a photograph of one day, not a guarantee for the 364 that follow. Protection does not fail on a schedule that happens to line up with your test date.
What actually changes between test dates
Between certificates, a protection system lives outdoors, underground and inside switchgear, exposed to everything a South African site can throw at it. The common ways it drifts out of spec are well understood:
- Corrosion. Buried electrodes and connections degrade over time, and earth resistance climbs slowly enough that nobody notices until it is measured.
- Mechanical damage. A grader clips a down conductor, a contractor cuts a bond, a vibrating structure loosens a clamp — all invisible from a desk.
- Copper theft. Earthing runs are stolen for scrap, often removing the exact conductor that was sound at the last test.
- Surge device end-of-life. An SPD absorbs transients until its metal-oxide varistors are spent. It can reach the end of its useful life without a single outward sign.
- Seasonal soil conditions. Dry soil raises resistance. A system tested after good rain can look very different in the middle of a dry, high-risk lightning season.
The real cost is not the fine
It is tempting to treat compliance as a box to tick so an auditor stays happy. But the standard exists because the failure it prevents is expensive in ways a fine never captures:
- Unplanned downtime when a fault finally announces itself during the storm you were relying on the system for.
- Damaged equipment — drives, PLCs, transformers — that a spent surge device was supposed to protect.
- Safety and legal exposure, where lightning and earthing failures carry real liability for the people on site.
- A weaker insurance position, arguing your case with a certificate that is eleven months old.
From point-in-time to continuous
The gap is not a paperwork problem — it is a visibility problem. Point-in-time testing gives you certainty on the test date and silence in between. Continuous monitoring keeps that certainty live: earth resistance and continuity are measured around the clock, surge devices are watched for end-of-life, and the moment a value drifts or a conductor is lost, someone knows.
The certificate still matters. What changes is that it stops being the only thing standing between you and an undetected failure. Instead of discovering a problem at the next annual test, you catch it while it is still small, schedule the repair on your terms, and keep an audit-ready record that reflects the system as it is now — not as it was last summer.
A yearly test proves your protection worked on one day. The rest of the year is a question of whether you can see it — or are just hoping.